Beskrivelse
Ultra-Compact 25 hp Round Baler for Lifestyle Properties, Equine Farms, and Small Holdings
The 9YK-870 is the smallest and lightest machine in EverPower’s round baler lineup — a 440 kg trailed roll drum baler that pairs with tractors as small as 25 hp. At a time when most round balers require 50–200 hp tractors and weigh 1000–4000 kg, the 9YK-870 offers a fundamentally different proposition: genuine roll drum baling technology in a package that fits the equipment, the paddock size, and the capital budget of Australia’s smallest working farms, hobby holdings, lifestyle properties, and equine operations.
The machine uses spring tooth direct feeding — the reel’s spring tines carry crop directly into the roll drum chamber without a secondary feeder stage — producing Φ630×700 mm rope-tied bales at an operating speed of 2–5 km/h. These are the smallest bales in the EverPower range, light enough for a single person to handle manually in most hay crops without any mechanical assistance. For properties where one person manages both the tractor and the bale handling, this single-operator capability fundamentally changes what is practical versus what requires an extra set of hands.
The 9YK-870’s 800 mm pickup reel, 700 mm chamber width, and 540 rpm PTO requirement are all scaled to the tractor sizes and windrow widths that small-property mowing equipment produces. This is not a scaled-down version of a larger machine with compromised capability — it is a machine designed from first principles for the operating environment of the small Australian farm. For a broader look at how round balers fit into different farm contexts, see our overview on round baler vs square baler key differences.
Complete Technical Specifications
Full technical documentation including PTO shaft configuration, roller maintenance schedule, and spare parts diagrams available on request — contact our team.
440 kg, 25 hp, Single-Person Operation — The 9YK-870 in Context
To understand what makes the 9YK-870 genuinely different, compare it against what the rest of the round baler market offers at this end of the scale — and what it does not. Most round balers start at 1000 kg and 50 hp. The 9YK-870 is a different category of machine entirely.
The five farm types the 9YK-870 serves that no other machine in this range can reach:
Equine Properties
Horse properties typically have a compact utility tractor for property maintenance — the same tractor that mows, drags arenas, and spreads manure. The 9YK-870 pairs with that tractor for hay baling without requiring a second, larger machine. The Φ630×700 mm bales are a practical size for horse-property feeding and bedding, manageable without a dedicated bale handler in most paddock situations.
Lifestyle Blocks
Rural lifestyle properties — 5 to 40 acres — often have a few sheep or cattle, a paddock that produces a seasonal grass crop, and a compact tractor for general property work. For these properties, baling is a once-or-twice-a-year event, and a 1000+ kg round baler is hard to justify for the bale volumes involved. The 9YK-870 is sized for this exact situation — capable enough to bale the paddock, simple enough to not dominate the property’s capital and maintenance budget.
Market Garden and Mixed Crop Farms
Market garden operations and small mixed crop farms often have residue baling needs — cover crop straw, spent vegetable vine material, oaten hay from a small paddock — that larger balers cannot be justified for economically. The 9YK-870’s small footprint and 800 mm pickup allows it to work on smaller paddock sections and irregular areas that larger machines cannot navigate efficiently, collecting crop residue that would otherwise be left to decompose or be burnt.
Small Sheep and Goat Holdings
Small sheep flocks and goat herds on holdings under 50 acres need manageable bale volumes that can be fed out by one person. A Φ630×700 mm rope-tied hay bale is the right size for this — small enough to handle individually, large enough to be a meaningful portion of daily feed ration. The 9YK-870 produces bales at a scale that matches both the property size and the feeding system without requiring a front-end loader every time a bale needs to be moved.
Hobby Farms and Rural Retreats
Rural properties where the primary occupants value the self-sufficiency aspect of producing their own hay — regardless of whether it is economically optimal per bale — benefit from a machine that is accessible, simple to operate, and easy to maintain without specialist agricultural knowledge. The 9YK-870’s mechanical simplicity, low component count, and published operating parameters (2–5 km/h, 540 rpm PTO) make it one of the most approachable balers in any manufacturer’s lineup for first-time baling operators.
How the 9YK-870 Works — Designed for Simplicity and Reliability at Compact Scale
The 9YK-870 uses fewer moving parts than any other machine in EverPower’s baler range. This is intentional — the operator profile for this machine is often someone who manages the property largely alone, and a machine that requires complex setup or troubleshooting during seasonal operation is a poor fit for that context.
800 mm Spring Tooth Pickup — Direct Feed at Walking Speed
The 800 mm spring-tooth pickup reel operates at 2–5 km/h — approximately walking pace at the lower end, light jogging pace at the upper end. This operating speed is not a limitation but a design choice: at 800 mm pickup width and the small bale volumes this machine produces per cycle, working at 2–5 km/h gives the spring tines adequate engagement time with the windrow material, the direct-feed path adequate transit time, and the operator adequate reaction time for a machine being operated without complex electronic monitoring systems.
540 rpm PTO — the correct setting for this machine
The 9YK-870 requires exactly 540 rpm at the PTO shaft — not 1000 rpm. Most compact utility tractors from 25 hp upward have a 540 rpm PTO as their standard or sole PTO speed, making this machine fully compatible with the tractor class it is designed to pair with. Always confirm your tractor’s PTO engages at 540 rpm before operating the 9YK-870 — running at 1000 rpm where the machine expects 540 rpm will damage the drive components. For tractors with dual-speed PTO (540/1000), ensure 540 rpm is selected before engagement.
Roll Drum Compression Chamber — Φ630 mm, 700 mm Wide
Despite being the most compact machine in the range, the 9YK-870 retains the roll drum compression chamber design — fixed-diameter steel rollers applying consistent radial pressure on the forming bale throughout the compression cycle. The chamber is 700 mm wide and produces a Φ630 mm diameter bale — dimensions that are physically manageable by one person in light-to-medium hay crops without mechanical assistance.
Why roll drum at this small scale still matters
Even on a property producing a few hundred bales per year, bale density consistency has practical importance: a denser bale stores more dry matter per unit of storage space, holds its shape better in outdoor covered storage, and feeds out more predictably when used as a daily ration supplement. The roll drum chamber’s fixed-compression approach produces more consistent density across the bale cross-section than a variable-chamber belt design at any scale, including the compact Φ630 mm format the 9YK-870 produces.
Rope Wrapping — Simple Tie Mechanism, Low Consumable Cost
Rope wrapping is used on the 9YK-870 for the same reasons as the 9YQ-1250 — lower consumable cost per bale and a simpler tying mechanism that matches the machine’s overall design philosophy. For a lifestyle property or hobby farm producing a few hundred bales per season at most, the consumable saving from rope versus net wrap over the machine’s working life is a meaningful number, and the simpler mechanism means less to maintain and fewer potential failure points in the tie cycle.
Bale size and rope requirements
The Φ630×700 mm bale circumference is substantially smaller than larger round balers in the range — meaning each tie cycle uses proportionally less rope per bale. The combination of lower rope consumption per bale and the lower per-metre cost of rope versus net wrap produces a significantly lower per-bale consumable cost than any net-wrap machine in the EverPower range. For small farms where the annual bale budget is a real consideration, this cost structure is practically significant.
Overall Dimensions 1300×1300×1350 mm — Fits Through Standard Farm Gates
At 1300 mm wide in transport configuration, the 9YK-870 fits through standard 1500 mm farm gates common across Australian lifestyle and hobby farm properties without requiring gate removal or special access arrangements. No other round baler in EverPower’s range comes close to this working width — the next most compact, the 9YQ-1250, is 2250 mm wide. This gate-friendly width is a practical advantage that buyers in small-property contexts notice immediately: the machine follows the tractor through every gate on the property without a separate access negotiation for each paddock move.
Road transport — trailer requirements
At 440 kg and 1300 mm wide, the 9YK-870 loads onto a standard single-axle plant or box trailer behind most vehicles — including utes and station wagons with appropriate tow rating — for transport between properties. This is not a capability any other machine in the round baler range offers. For hobby farmers or small operations that might want to move the baler between a home property and a leased paddock, or lend it to a neighbour, the transport convenience is a genuine operational advantage over larger machines.
9YK-870 in Context — Where It Sits in the EverPower Round Baler Range
The 9YK-870 is not just the smallest machine in the range — it is in a different category from all others. The numbers below illustrate how distinct its position is from even the next-smallest model.
✓
✓
✓
✓
✓
✓
→
→
→
→
Hay Types and Field Situations Best Suited to the 9YK-870
The 9YK-870’s 800 mm pickup, direct spring-tooth feed, and rope wrapping are matched to dry hay crops below 18% moisture on small paddocks. The following describes the specific crops and conditions where it performs most reliably.
Oaten and Ryegrass Hay
The primary application. Cured oaten and ryegrass hay at 14–18% moisture moves cleanly through the 800 mm pickup and spring-tooth direct feed at 2–5 km/h. Windrows from a small disc mower or mower-conditioner in the 1.2–1.5 metre range should be raked or merged to an 800 mm width before baling for clean single-pass capture.
Mixed Pasture and Clover Hay
Cured mixed pasture and clover hay suits the 9YK-870 well at below 18% moisture. Clover and legume material needs more complete curing than cereal hay before baling under rope — legume material at higher moisture is more prone to heating in compact bale storage. Use a hay moisture meter to confirm curing rather than estimating by touch.
Lucerne Hay (Dried)
Dried lucerne at 14–16% moisture bales through the 9YK-870 in light windrows. Lucerne’s leafy material is fine-stemmed and tends to flow well through the spring-tooth direct feed at the lower end of operating speed. Ensure full curing to below 16% for rope-tied bales — partly dried lucerne can heat under rope if moisture retention is higher than 18%.
Light Cereal Straw
Light wheat and barley straw from a small combine or sickle bar header bales well through the 9YK-870 after raking to 800 mm windrow width. Straw is the most forgiving crop for rope-tied storage — low moisture and low heating risk means rope-tied straw bales store reliably in covered outdoor storage for extended periods.
Horse Bedding and Feed Applications
The Φ630×700 mm bale is well-matched to horse property use. A single bale can be handled by one person, moved into a stable, and spread or fed without the equipment needed for a 1000 mm diameter bale. For properties keeping horses on a lifestyle block with a compact tractor, the 9YK-870 enables full self-sufficiency in hay production from on-property grass without external contractor involvement.
Not Suited to High-Moisture Silage
The 9YK-870 is a dry hay baler. High-moisture silage crops at 50–70% moisture require net wrap to hold bale shape after ejection, and subsequent stretch film wrapping to create the anaerobic seal needed for silage fermentation. Neither the 9YK-870 nor the 9YQ-1250 are designed for this application. For silage baling with net wrap, the 9YQ-1950 is the entry point in EverPower’s range.
Getting the Best from the 9YK-870 — Practical Tips for Small Farm Use
The 9YK-870’s simplicity means fewer adjustment points than larger machines — but the fundamentals of correct baling practice still determine whether the season’s hay ends up stored well or wasted. These tips are written for first-time baler operators as well as experienced hands.
Confirm 540 rpm PTO Before Every Session
The 9YK-870 requires 540 rpm at the PTO shaft. Before engaging the PTO at the start of each session — even if you have used the machine before — confirm your tractor’s PTO selector is set to 540 rpm and not 1000 rpm. On tractors with a dual-speed PTO, this is a switch or lever setting that can be accidentally changed between uses. Running the 9YK-870 at 1000 rpm is a drive component failure in progress and will cause immediate damage to the driveline components.
Rake Windrows to 800 mm Before Baling
Most small mowers and mower-conditioners produce windrows wider than 800 mm. Before baling with the 9YK-870, rake or merge windrows to approximately 800 mm width — the same width as the pickup reel. Baling over a 1200 mm windrow with an 800 mm reel leaves 400 mm of crop material uncollected on every pass. Raking is a one-time investment per field that eliminates both the edge loss and the need for a second pass to collect what was missed.
Check Hay Moisture — Strictly Below 18%
Rope-tied bales are less forgiving of elevated moisture than net-wrapped bales. Hay above 18% moisture in a rope-tied compact bale will heat during storage, reducing nutritional value and in severe cases producing a fire risk in stored hay. Invest in a hand-held hay moisture meter — they are inexpensive and the decision they help you make (bale today or wait 24 hours) is the single most important quality call in the hay season. When in doubt on a cloudy or humid day, wait.
Work at 2–5 km/h — This Is Not a Limitation
The 9YK-870 is rated at 2–5 km/h operating speed. Resist the urge to push above 5 km/h in an attempt to increase bale output rate — at higher speed, the 800 mm reel overpasses the windrow before the pickup completes a full tine cycle engagement, leaving material in the field and potentially surging the direct-feed chamber. In light hay, 4–5 km/h is a productive pace. In dense or slightly heavier windrows, 2–3 km/h ensures clean pickup and consistent chamber filling on every cycle.
Check the Rope Path Before Each Day’s Baling
The rope wrapping mechanism on the 9YK-870 is straightforward — inspect the rope path from spool through the guide to the tie mechanism before the first bale of each session. Check for kinks in the rope, wear on guide surfaces, and correct spool mounting. An untied bale mid-field on a small property — where the operator may also be handling bales alone — is more disruptive than on a large operation with multiple helpers available. A 2-minute rope path check prevents the common knot-skip failures that result from a partially worn guide or kinked rope section.
Grease All Points — Fewer Points Than Larger Machines
The 9YK-870’s simpler design means fewer grease points than the 2000+ kg machines — but each one is still important. Grease the reel shaft bearings, roller bearings, and PTO shaft joints at the frequency specified in the maintenance schedule. For a machine used seasonally with periods of storage between uses, grease all points immediately before storage and again before the first use of the next season to displace any moisture that may have entered bearing housings during extended rest periods.
Compact Baling Technology at Lifestyle Farm Price — Factory-Direct from EverPower Australia
The 9YK-870 is available directly from EverPower Baling Machinery Australia Pty Ltd, 27 Harley Crescent, Condell Park NSW 2200. Learn more at silage-baler.com/about-us.
Factory-Direct Pricing — Accessible Entry Point
EverPower supplies the 9YK-870 directly to Australia without distributor margin markup. For a lifestyle property or hobby farm buyer where machine cost is a real constraint, the factory-direct model brings a genuine roll drum round baler within reach at a price that reflects the machine’s actual production cost — not its position in a premium product tier or the margin stack of an importer plus distributor plus dealer.
NSW Spare Parts — Tines, Rollers, Rope Components
Spring pickup tines, roller bearings, and rope wrapping mechanism components for the 9YK-870 are held at our Condell Park NSW facility. For a small farm where baling happens once or twice a year, having a simple and reliable parts source within Australia means a worn tine or rope component can be replaced quickly rather than waiting for international shipping that takes longer than the hay season itself.
Phone Support for First-Time Baler Buyers
Our Sydney-based team supports buyers through PTO connection, 540 rpm confirmation, pickup height setup, rope routing, and initial field operation for the 9YK-870. Many buyers of this machine are operating a baler for the first time — we expect this and adjust our support approach accordingly. Contact us at 61 2 9708 3322 or [email protected].
Frequently Asked Questions
Common questions from lifestyle property owners, equine farmers, and hobby farm buyers considering the 9YK-870.
