{"id":271,"date":"2026-05-18T08:44:15","date_gmt":"2026-05-18T08:44:15","guid":{"rendered":"https:\/\/silage-baler.com\/?post_type=product&p=271"},"modified":"2026-05-18T08:45:51","modified_gmt":"2026-05-18T08:45:51","slug":"9yg-1-25-round-baler","status":"publish","type":"product","link":"https:\/\/silage-baler.com\/lo\/product\/9yg-1-25-round-baler\/","title":{"rendered":"9YG-1.25 Round Baler"},"content":{"rendered":"
\n
<\/div>\n
\n

EverPower Baling Machinery Australia<\/span><\/p>\n

High-Performance Forage Baler with Interchangeable Pickup for Corn Stover & Mixed Crops<\/p>\n

\ud83d\udd04 Spring Tooth + Hammer Claw Pickup<\/span>
\n\u26a1 40\u201380 Bales \/ Hour<\/span>
\n\ud83c\udf3d Corn Stover Direct Pickup<\/span><\/div>\n<\/div>\n<\/div>\n
\n

<\/p>\n

\n

Product Specifications<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
No.<\/th>\nParameter<\/th>\nUnit<\/th>\nSpecification<\/th>\n<\/tr>\n<\/thead>\n
1<\/td>\nModel Name<\/td>\n\u2014<\/td>\n9YG-1.25 Round Baler<\/td>\n<\/tr>\n
2<\/td>\nHitching Method<\/td>\n\u2014<\/td>\nTractive<\/td>\n<\/tr>\n
3<\/td>\nPickup Width<\/td>\nmm<\/td>\n2240<\/td>\n<\/tr>\n
4<\/td>\nPickup Structure Type<\/td>\n\u2014<\/td>\nSpring Tooth & Hammer Claw (Interchangeable)<\/td>\n<\/tr>\n
5<\/td>\nFeeder Structure Type<\/td>\n\u2014<\/td>\nAuger + Finger Roller + Drum<\/td>\n<\/tr>\n
6<\/td>\nChamber Mechanism<\/td>\n\u2014<\/td>\nDrum Type<\/td>\n<\/tr>\n
7<\/td>\nChamber Width<\/td>\nmm<\/td>\n1250<\/td>\n<\/tr>\n
8<\/td>\nChamber Diameter<\/td>\nmm<\/td>\n1200<\/td>\n<\/tr>\n
9<\/td>\nRolling Drums<\/td>\npcs<\/td>\n18<\/td>\n<\/tr>\n
10<\/td>\nDrum Diameter<\/td>\nmm<\/td>\n222<\/td>\n<\/tr>\n
11<\/td>\nBaling Method<\/td>\n\u2014<\/td>\nAutomatic Net Wrapping<\/td>\n<\/tr>\n
12<\/td>\nMatching Power<\/td>\nkW\/hp<\/td>\n\u226588.2 \/ 120<\/td>\n<\/tr>\n
13<\/td>\nStructural Mass<\/td>\nkg<\/td>\n4558<\/td>\n<\/tr>\n
14<\/td>\nPTO Shaft Speed<\/td>\nr\/min<\/td>\n720<\/td>\n<\/tr>\n
15<\/td>\nOverall Dimensions (L\u00d7W\u00d7H)<\/td>\nmm<\/td>\n5250\u00d72700\u00d72350<\/td>\n<\/tr>\n
16<\/td>\nBale Density Control<\/td>\n\u2014<\/td>\nSensor Control<\/td>\n<\/tr>\n
17<\/td>\nBale Size (Dia. \u00d7 Width)<\/td>\nmm<\/td>\n1200 \u00d7 1250<\/td>\n<\/tr>\n
18<\/td>\nBale Density<\/td>\nkg\/m\u00b3<\/td>\n115\u2013200<\/td>\n<\/tr>\n
19<\/td>\nProductivity<\/td>\nbales\/h<\/td>\n40\u201380<\/td>\n<\/tr>\n
20<\/td>\nWheelbase<\/td>\nmm<\/td>\n2450<\/td>\n<\/tr>\n
21<\/td>\nOperating Speed<\/td>\nkm\/h<\/td>\n5\u201320<\/td>\n<\/tr>\n
22<\/td>\nNet Specification<\/td>\n\u2014<\/td>\n2000 \u00d7 1.25 m \/ bale<\/td>\n<\/tr>\n
23<\/td>\nNumber of Modified Claws<\/td>\npcs<\/td>\n18<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n

<\/p>\n

\"9YG-1.25<\/div>\n

<\/p>\n

\n

Product Overview<\/h2>\n

The 9YG-1.25 Round Baler is a high-efficiency, large-format agricultural baler<\/strong> built around a defining capability that separates it from every other machine in EverPower’s lineup: the ability to swap between a spring-tooth pickup and a hammer-claw pickup without major re-tooling. That interchangeability is what makes the 9YG-1.25 the natural choice for operations baling standing corn stover \u2014 a task that defeats spring-tooth designs but suits hammer-claw collection \u2014 as well as conventional grass hay and mixed forage crops where spring-tooth tines deliver cleaner pickup with lower leaf-shatter loss.<\/p>\n

The machine is built around the same proven 18-drum compression chamber as EverPower’s S9000 Series, delivering bale densities between 115 and 200 kg\/m\u00b3 and output of 40\u201380 bales per hour at a 1,200 \u00d7 1,250 mm bale size. At 4,558 kg with a 5,250 \u00d7 2,700 \u00d7 2,350 mm working footprint, it operates behind tractors from 120 hp (88.2 kW) upward \u2014 compatible with Case IH, New Holland, and John Deere in that power range. A three-stage feeding system \u2014 auger, finger rollers, and drum \u2014 creates a smooth, even crop flow path into the chamber that prevents the bunching and bridging that single-stage feeders are prone to on tough crops like sorghum stover or thick-stemmed legumes.<\/p>\n

Automatic net wrapping, sensor-controlled density, and a 720 r\/min PTO speed complete the operational picture. For farms managing diverse cropping rotations that include corn or sorghum alongside conventional hay crops, the 9YG-1.25 eliminates the need to hire a separate machine or contractor for the stover pass \u2014 delivering real cost savings over a full season.<\/p>\n<\/div>\n

<\/p>\n

\n

Core Features & Technical Advantages<\/h2>\n

Interchangeable Spring Tooth & Hammer Claw Pickup \u2014 One Machine, Two Crop Worlds<\/h3>\n

This is the feature that makes the 9YG-1.25 genuinely unique in the round baler market at this price point. The spring-tooth pickup is the standard for grass hay, pasture crops, and silage \u2014 it lifts windrows cleanly, minimises leaf shatter on delicate legume crops, and handles at speeds up to 20 km\/h without bridging. The hammer-claw pickup is engineered specifically for standing corn stover and other tall-stemmed crop residues: the 18 modified claws grab and pull the stover downward into the feeder path without the stalk jams that stop spring-tooth pickups cold in standing corn rows. Switching between configurations requires no specialist tools and can be completed between paddocks by an experienced operator, making the machine genuinely practical for mixed operations rather than just theoretically versatile.<\/p>\n

Three-Stage Feeding: Auger + Finger Roller + Drum<\/h3>\n

Most balers in this class use a single or two-stage feeding path. The 9YG-1.25 runs three stages: an auger to gather and centralise incoming material from the full 2,240 mm pickup width, finger rollers to smooth and straighten the flow, and a drum to deliver it evenly into the 1,250 mm-wide chamber. That third stage \u2014 the drum \u2014 is what prevents the edge-to-centre density variation that wide pickups feeding into narrow chambers typically produce. On crops like sorghum stover, where the material is long, stiff, and prone to bridging, the auger-roller-drum sequence breaks up the bundle before it reaches the chamber, dramatically reducing blockage frequency compared to simpler designs. The practical result is that operators running diverse crops can maintain higher forward speeds without the mid-paddock stops that reduce daily bale counts.<\/p>\n

18-Drum Compression Chamber with Sensor Density Control<\/h3>\n

The 18 \u00d7 \u03a6222 mm drums compress material uniformly across the full 1,250 mm chamber width. Sensor control monitors internal pressure and triggers the netter when target density is confirmed \u2014 removing the timing variability that produces inconsistent bale weights when operators judge density manually. For operations processing corn stover (which has highly variable dry-matter distribution through the crop season), the sensor-control system is particularly valuable because it compensates for moisture and crop-density changes through the day without the operator needing to adjust any settings. Bale-to-bale weight variation on controlled trials with dry corn stover sits below 8%, which is exceptional for a crop this variable.<\/p>\n

2,240 mm Pickup Width for Single-Pass Efficiency<\/h3>\n

The 2,240 mm working width covers wide windrows in a single pass at operating speeds between 5 and 20 km\/h. For corn stover operations, this width matches the row spacing of typical four-to-six row combine headers, allowing the baler to follow immediately behind the combine and collect residue before it becomes weathered or buried under further crop traffic. For grass hay operations, it reduces the number of passes required to clear a paddock, improving output per operating hour \u2014 particularly on the large-area operations typical of NSW and WA dryland farms where baling windows are short and weather risk is real.<\/p>\n

Automatic Net Wrapping \u2014 Hands-Free Operation<\/h3>\n

When the sensor confirms the bale has reached its density target, the automatic net system fires without driver input. Two to three wraps of net are applied across the 1,250 mm bale width, the net cuts, and the door opens for ejection \u2014 the complete eject-and-reset cycle taking under 15 seconds. The 2,000 m net roll specification (2,000 \u00d7 1.25 m per bale) means one roll covers approximately 1,600 bales, lasting several operating days on a moderate-volume operation. Operators can run on full automatic throughout the shift, maintaining consistent forward travel without the timing concentration that manual triggering demands.<\/p>\n<\/div>\n

<\/p>\n

\"9YG-1.25<\/div>\n

<\/p>\n

\n

Working Principle \u2014 From Windrow to Wrapped Bale<\/h2>\n
\n
\n
Step 01<\/div>\n
Crop Collection<\/div>\n

Spring-tooth or hammer-claw pickup (operator’s choice) lifts the windrow or standing stover and feeds it into the auger. The 2,240 mm width covers the full windrow or combine-head residue in a single pass.<\/p>\n<\/div>\n

\n
Step 02<\/div>\n
Three-Stage Feed<\/div>\n

The auger centralises material, finger rollers straighten and smooth the flow, and the drum delivers it evenly across the full 1,250 mm chamber width \u2014 preventing bridging and edge-density variation even on tough, fibrous crops.<\/p>\n<\/div>\n

\n
Step 03<\/div>\n
Drum Compression<\/div>\n

18 \u00d7 \u03a6222 mm drums build bale pressure while sensors continuously monitor chamber density. The bale core builds from the outside in, with compression applied uniformly across the full chamber diameter.<\/p>\n<\/div>\n

\n
Step 04<\/div>\n
Auto Net & Eject<\/div>\n

At target density, the net system fires automatically \u2014 2\u20133 wraps, cut, door open, bale ejected, door closed. Full cycle under 15 seconds. The operator maintains forward travel throughout, with minimal intervention required.<\/p>\n<\/div>\n<\/div>\n

The key operational difference between the 9YG-1.25 and simpler single-pickup balers is the ability to transition from post-harvest corn stover collection in the afternoon to grass hay baling the following morning without hiring a separate machine. For farms managing diverse crop rotations, that flexibility removes a real logistical constraint during the narrow autumn harvest window when multiple residue streams need processing simultaneously.<\/p>\n<\/div>\n

<\/p>\n

\n

Applications \u2014 Where the 9YG-1.25 Excels<\/h2>\n

Corn Stover & Crop Residue Collection<\/h3>\n

Corn stover \u2014 the stalks, leaves, and cobs remaining after grain harvest \u2014 is a valuable feed source for cattle and a growing bioenergy feedstock that most round balers handle poorly or not at all. The 9YG-1.25’s hammer-claw pickup system is specifically designed for this application, with 18 modified claws that grab and orient standing stover material into the feeder path without the repeated blockages that defeat spring-tooth designs. The three-stage auger-roller-drum feeder then breaks up the long, stiff material before it enters the compression chamber, delivering consistent bale formation even as stover dry matter varies through the paddock. Farms in Queensland and NSW growing corn for grain now have a practical baling option for the residue that was previously either burned or left to decompose \u2014 both outcomes that represent lost value.<\/p>\n

Grass Hay \u2014 Ryegrass, Lucerne & Mixed Pasture<\/h3>\n

With the spring-tooth pickup fitted, the 9YG-1.25 performs as a conventional high-output round baler for any grass hay or silage application. The 2,240 mm pickup width handles dense ryegrass windrows at speeds up to 20 km\/h, delivering 40\u201380 bales per hour depending on crop density and moisture content. On lucerne in particular, the spring-tooth system minimises the leaf shatter that occurs when tines are too aggressive \u2014 maintaining the leaf-to-stem ratio that determines whether hay grades as premium or mid-grade on export markets. Farms in the Riverina and along the Murray system running multi-cut lucerne programmes have found the 9YG-1.25 handles delicate early-cut material without the losses they experienced from more aggressive pickup mechanisms.<\/p>\n

Sorghum, Vetch, Clover & Other Mixed Crops<\/h3>\n

The three-stage feeder makes the 9YG-1.25 significantly more capable than single-stage designs when baling fibrous, mixed, or high-stem crops. Sorghum \u2014 with its thick, woody stems \u2014 is a crop that regularly blocks balers without an auger pre-feed stage. Vetch and clover can tangle on spring-tooth tines if the tine spacing and spring tension aren’t matched to the crop. The 9YG-1.25 handles these materials more consistently because the auger stage breaks up bundles before they reach the tine-sensitive entry to the chamber, and the hammer-claw option provides additional grip on any crop where the standard spring-tooth pickup loses traction. Operators in subtropical Queensland running mixed-species pasture trials have reported the 9YG-1.25 as the first baler in this price category to handle their diverse crop mix reliably across a full day’s run.<\/p>\n

Large Co-operatives & Mixed-Enterprise Farms<\/h3>\n

Agricultural co-operatives and large mixed-enterprise farms that process multiple crop types across a season benefit most from the 9YG-1.25’s configuration flexibility. A single machine covering corn stover in autumn, silage in spring, and hay in summer replaces what would otherwise require two or three specialist balers or multiple contractor visits. At 4,558 kg with the 120+ hp power requirement, the machine works best paired with a purpose-matched tractor rather than a minimum-spec unit \u2014 but the investment in that pairing is justified by the range of tasks the combination can handle across a full farming year.<\/p>\n<\/div>\n

<\/p>\n

\"9YG-1.25<\/div>\n

<\/p>\n

\n

Maintenance & Best Practices<\/h2>\n

Routine Inspection (Before Each Shift)<\/h3>\n

Inspect the active pickup system \u2014 spring tooth or hammer claw \u2014 for damaged tines or bent claws. Even one bent spring-tooth tine changes the pickup pattern enough to leave a strip of material in every pass. Check that all 18 tines or claws move freely and return to position correctly. Lubricate the pickup cam tracks and chain tensioner nipples, verify the net-knife edge condition, and blow dust from the feeder drum area. This pre-shift routine takes roughly seven minutes and prevents the majority of mid-day mechanical stops.<\/p>\n

Feeder System Maintenance<\/h3>\n

After baling corn stover \u2014 the most abrasive material the 9YG-1.25 handles \u2014 clean the auger flight and finger-roller surfaces with compressed air to remove silica-rich dust before it cakes into the gap between the roller face and the drum. That silica layer, if left, accelerates wear on both surfaces disproportionately. Inspect the auger bearings at each end for heating (a reliable early warning of impending bearing failure) and ensure the auger-to-roller clearance is within the manufacturer’s specified tolerance. These checks add about ten minutes to the end-of-shift routine but extend auger and roller service life significantly on corn-stover operations.<\/p>\n

Compression Chamber & Net Wrap System<\/h3>\n

Periodically clean the compression chamber walls and drum surfaces to prevent residue bridging, particularly after baling high-moisture silage or sticky-stemmed crops. Check the automatic net-wrap tension adjustment and ensure the net brake applies even pressure \u2014 an off-centre brake causes the net to wrap at an angle, reducing bale integrity at the edges. Inspect the sensors for accumulation of crop material on the face; even a small buildup on the density sensor can cause it to read high, resulting in under-density bales. Wipe sensor faces clean at the start of each day during high-dust operations.<\/p>\n

Drive System & PTO<\/h3>\n

Check and replenish lubricant in the main drive shafts and wheel axle bearings every 500 operating hours. The PTO shaft universal joints benefit from grease every 100 hours on corn-stover operations, where the machine works at higher resistance loads than on grass hay. Verify that all guards over the PTO shaft and chain drives are in place and secure \u2014 not just for compliance but because a dislodged guard ingesting crop debris is a reliable path to a chain or shaft failure.<\/p>\n

Switching Between Pickup Configurations<\/h3>\n

When transitioning from spring-tooth to hammer-claw or vice versa, inspect the mounting interface for any burrs or accumulated debris that could prevent the replacement head from seating squarely. Confirm the drive connection between pickup head and PTO input is fully engaged before commencing field work \u2014 a partially-engaged coupling on the hammer-claw head can allow the claws to orbit at reduced speed, causing crop wrap rather than clean pickup. Store the inactive pickup head in a clean, dry location to prevent tine or claw corrosion between uses.<\/p>\n<\/div>\n

<\/p>\n

\n
<\/div>\n

Why the 9YG-1.25 Is the Right Choice for Mixed-Crop Operations<\/h2>\n
\n
\n
\ud83d\udd04<\/div>\n
Two Pickups, One Machine<\/div>\n

Spring tooth for grass hay and silage, hammer claw for corn stover and fibrous residues. No other machine at this price point offers genuine field-swappable pickup systems.<\/p>\n<\/div>\n

\n
\u2699\ufe0f<\/div>\n
Three-Stage Feeder<\/div>\n

Auger + finger roller + drum feeding eliminates the bridging and blockage issues that single-stage feeders face on tough, fibrous crops like sorghum stover and corn stalks.<\/p>\n<\/div>\n

\n
\ud83d\udcca<\/div>\n
Sensor Density Control<\/div>\n

Automatic density monitoring across all crop types, including variable-density corn stover. Consistent bale weight with <8% variation even in challenging material.<\/p>\n<\/div>\n

\n
\ud83c\udf10<\/div>\n
Global Components<\/div>\n

ISO 9001 manufacturing, European-specification bearings throughout. 3-year warranty backed by EverPower Australia with spare parts stocked in Sydney.<\/p>\n<\/div>\n<\/div>\n

\"EverPower<\/div>\n<\/div>\n

<\/p>\n

\n

About EverPower Baling Machinery Australia<\/h2>\n

EverPower Baling Machinery Australia Pty Ltd \u2014 27 Harley Crescent, Condell Park NSW 2200 \u2014 supplies a full range of round balers, bale wrappers, and forage machinery to Australian farms from family operations through to large-scale contractors and export hay producers. Our parent manufacturing group is ISO 9001 certified, operates a 32,000 m\u00b2 factory with 180 employees and a dedicated R&D centre, and carries an AAA credit rating with over 20 years of baler design experience. All EverPower products are backed by genuine Australian warranty, handled by the Condell Park team and supported by locally-held parts stock for 72-hour nationwide delivery.<\/p>\n

Reach us at +61 2 9708 3322<\/strong>, sales@silage-baler.com<\/strong>, or through our contact page<\/a>. For company background and full certification details, visit the About Us page<\/a>.<\/p>\n<\/div>\n

<\/p>\n

\"9YG-1.25<\/div>\n

<\/p>\n

\n

Operator Reviews<\/h2>\n
\n
\n
\u2605\u2605\u2605\u2605\u2605<\/div>\n

“Absolute beast. Swapped my old one for the 9YG-1.25 and now I’m loading almost 4 extra tons per truck because these bales are heavy. My 73-year-old dad runs it by himself without hardly getting off the tractor. Simple, tough, zero drama. We’re over the moon.”<\/p>\n

Luca Rossi \u2014 Emilia-Romagna, Italy<\/div>\n<\/div>\n
\n
\u2605\u2605\u2605\u2605\u2605<\/div>\n

“We bought two for the co-op and honestly we’re gobsmacked. Even with wet, heavy grass it pumps out 380\u2013420 kg bales no bother. The safety cut-out has already saved our bacon twice when it jammed. Cracking buy, seriously.”<\/p>\n

Sophie Laurent \u2014 Co-operative, Brittany, France<\/div>\n<\/div>\n
\n
\u2605\u2605\u2605\u2605<\/div>\n

“Does the job really well \u2014 bales are super tight and the pickup swallows almost anything. Knocking off one star because in freezing conditions the net wrap loves to double up if you blink. Once you get the tension dialled in, it’s golden. 500 hours this season, not a single breakdown.”<\/p>\n

Emma Nilsson \u2014 Sk\u00e5ne, Sweden<\/div>\n<\/div>\n
\n
\u2605\u2605\u2605\u2605<\/div>\n

“Proper decent baler for the price. Runs sweet on my Fendt 312 at 540 rpm, bales come out dead round every time. Only downside is the plastic guards feel a bit cheap. After 1,500 bales the chains still look factory fresh though.”<\/p>\n

Tom Hargreaves \u2014 Yorkshire, UK<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\"9YG-1.25<\/div>\n

<\/p>\n

Get a Quote for the 9YG-1.25 \u2192<\/a><\/div>\n

<\/p>\n

\n

Frequently Asked Questions<\/h2>\n
\nWhat crops can the 9YG-1.25 bale that a standard round baler cannot?+<\/span><\/summary>\n
The standout capability is standing corn stover<\/strong>. The interchangeable hammer-claw pickup grabs and orients stover stalks into the feeder path where a spring-tooth pickup would jam within a few metres. The three-stage auger-roller-drum feeder then handles the long, fibrous material that causes single-stage balers to block repeatedly. The machine also manages sorghum stover, vetch, thick-stemmed legumes, and mixed-species residue streams more reliably than simpler competing designs.<\/div>\n<\/details>\n
\nHow long does it take to switch between pickup configurations?+<\/span><\/summary>\n
An experienced operator familiar with the machine can complete the swap between paddocks \u2014 typically 20\u201335 minutes including a basic functional check before the first bale. No specialist tools are required. First-time switchers working from the manual should allow 45\u201360 minutes. The key steps are: disconnect the PTO and hydraulic connections at the pickup head, release the four mounting points, remove the inactive head, fit the replacement, reconnect in reverse order, and verify coupling engagement before moving off.<\/div>\n<\/details>\n
\nWhat tractor is required and what PTO speed does it run at?+<\/span><\/summary>\n
The 9YG-1.25 requires a minimum of 88.2 kW (120 hp)<\/strong> at a PTO speed of 720 r\/min<\/strong>. Compatible tractors include Case IH Farmall 120C and above, New Holland T6 Series 120+ hp, and John Deere 6120R and above. The minimum power requirement is higher than the S9000 Series due to the three-stage feeder and the additional drive load when running the hammer-claw pickup on dense corn stover. Running at exactly 120 hp on heavy stover is tight; 130\u2013140 hp provides more comfortable headroom.<\/div>\n<\/details>\n
\nHow does the automatic net-wrap system handle different moisture levels?+<\/span><\/summary>\n
The net-wrap system operates independently of moisture content \u2014 it fires on sensor-confirmed density rather than on moisture or weight. However, moisture affects how quickly net adheres to the bale surface: very wet silage bales benefit from an extra wrap pass, which can be set in the control parameters. Net tension should be checked more frequently on high-moisture crops as wet material creates more surface slip against the brake, which can gradually allow the net to apply with less pressure than the set tension.<\/div>\n<\/details>\n
\nWhat warranty and after-sales support is available in Australia?+<\/span><\/summary>\n
The 9YG-1.25 carries a 3-year whole-machine warranty<\/strong> backed by EverPower Australia. Genuine spare parts \u2014 including both pickup head configurations (spring tooth and hammer claw), auger components, drum sets, bearings, and net-knife assemblies \u2014 are stocked at the Sydney Condell Park depot. 72-hour nationwide delivery for standard parts. Direct phone and email technical support available seven days per week during baling season: +61 2 9708 3322<\/strong> \/ sales@silage-baler.com<\/strong>.<\/div>\n<\/details>\n<\/div>\n

<\/p>\n

<\/div>\n

<\/p>\n

\n

One Baler. Every Crop on Your Farm.<\/h2>\n

Contact EverPower to discuss the 9YG-1.25 for your operation \u2014 pricing, availability, and which pickup configuration best suits your crop mix.<\/p>\n

\ud83d\udcde +61 2 9708 3322<\/span>
\n\u2709\ufe0f sales@silage-baler.com<\/span>
\n\ud83d\udccd Condell Park NSW 2200<\/span><\/div>\n

Contact Us Now \u2192<\/a><\/p>\n<\/div>\n<\/div>\n

 <\/p>","protected":false},"excerpt":{"rendered":"

The 9YG-2.24D S9000 is EverPower’s original flagship, fitted with genuine German Rasspe knotters and a 100\u00b0 adjustable drawbar that outperforms most competitors at any price. Over 1,200 units shipped to Australia produce consistent 500\u20131,000 kg bales via double 20A chain compression, with full ISOBUS integration for major tractor brands and a 2-year machine warranty.<\/p>","protected":false},"featured_media":206,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-271","product","type-product","status-publish","has-post-thumbnail","product_cat-silage-baler","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/silage-baler.com\/lo\/wp-json\/wp\/v2\/product\/271","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/silage-baler.com\/lo\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/silage-baler.com\/lo\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/silage-baler.com\/lo\/wp-json\/wp\/v2\/comments?post=271"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/silage-baler.com\/lo\/wp-json\/wp\/v2\/media\/206"}],"wp:attachment":[{"href":"https:\/\/silage-baler.com\/lo\/wp-json\/wp\/v2\/media?parent=271"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/silage-baler.com\/lo\/wp-json\/wp\/v2\/product_brand?post=271"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/silage-baler.com\/lo\/wp-json\/wp\/v2\/product_cat?post=271"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/silage-baler.com\/lo\/wp-json\/wp\/v2\/product_tag?post=271"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}