{"id":722,"date":"2026-05-27T03:52:49","date_gmt":"2026-05-27T03:52:49","guid":{"rendered":"https:\/\/silage-baler.com\/?p=722"},"modified":"2026-05-27T03:52:49","modified_gmt":"2026-05-27T03:52:49","slug":"hay-baler-conveyor-9jyy-4-5-buyers-guide-and-setup","status":"publish","type":"post","link":"https:\/\/silage-baler.com\/nl\/application\/hay-baler-conveyor-9jyy-4-5-buyers-guide-and-setup\/","title":{"rendered":"Hay Baler Conveyor 9JYY-4.5: Buyer’s Guide and Setup"},"content":{"rendered":"
\n

The Labour Bottleneck Every Hay Operation Faces After the Baler<\/h2>\n

For most Australian hay operations, the baler is the headline machine \u2014 it is the piece of equipment that determines how many bales per hour the paddock produces. But the baler is only half the productivity equation. Once a small square bale is ejected onto the ground, it must be picked up, transported, and stacked in a shed or on a truck. This post-baler handling is where labour hours accumulate, where worker injuries occur most frequently, and where the effective throughput of the whole operation is actually determined. A baler producing 80 small square bales per hour means nothing if the shed stacking crew can only process 50 per hour \u2014 the baler will be slowed, bales will accumulate in the paddock in the sun and weather, and the day’s output will be limited by the slowest human in the chain rather than by the machine. The 9JYY-4.5 Hay Baler Conveyor from EverPower Baling Machinery Australia is a purpose-built belt conveyor that connects the baling operation to the shed stacking operation, moving bales continuously from the paddock pickup point to the stack height required without additional manual lifting. This guide covers how it works, what operations it suits, how to set it up correctly, and what to consider when evaluating it against other bale-handling options.<\/p>\n

\"9JYY-4.5<\/p>\n

The 9JYY-4.5 Hay Baler Conveyor moves small square bales from ground level to shed stack height continuously, eliminating the manual lifting that is the most time-consuming and injury-prone part of the hay handling operation.<\/p>\n<\/div>\n

What Is the 9JYY-4.5?<\/h2>\n

The 9JYY-4.5 is a motorised belt conveyor with a 4.5-metre working length, designed specifically for small square hay bales in the 15\u201335 kg weight range. The conveyor carries bales on a continuous belt from a ground-level infeed point \u2014 typically positioned at the shed doorway or truck loading position \u2014 upward at an adjustable angle to the stack or truck deck height required. The 4.5-metre length allows the conveyor to reach stack heights of approximately 2.2\u20132.8 metres at typical operating angles of 25\u201335 degrees, covering the full height of a standard Australian hay shed stack without repositioning.<\/p>\n

The belt is driven by an electric motor \u2014 typically 0.75\u20131.1 kW, single-phase 240 V \u2014 which means it can run from a standard shed power outlet without 3-phase infrastructure. Belt speed is set for consistent bale flow at approximately 0.3\u20130.5 m\/s \u2014 fast enough to maintain continuous bale throughput, slow enough for the stacker at the top to position each bale accurately without rushing. The model designation reflects the machine category (9JYY = conveyor for hay bale operations) and the working length (4.5 metres).<\/p>\n

Key Specifications<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Specification<\/th>\nValue<\/th>\n<\/tr>\n<\/thead>\n
Model<\/td>\n9JYY-4.5<\/td>\n<\/tr>\n
Working Length<\/td>\n4,500 mm<\/td>\n<\/tr>\n
Belt Width<\/td>\n500 mm (accommodates bales up to 460 mm wide)<\/td>\n<\/tr>\n
Max Bale Weight<\/td>\n35 kg<\/td>\n<\/tr>\n
Operating Angle<\/td>\n20\u201340 degrees (adjustable)<\/td>\n<\/tr>\n
Max Stack Height<\/td>\nApprox. 2.2\u20132.8 m at 30\u201335\u00b0 angle<\/td>\n<\/tr>\n
Motor Power<\/td>\n0.75\u20131.1 kW single-phase 240 V<\/td>\n<\/tr>\n
Belt Speed<\/td>\nApproximately 0.3\u20130.5 m\/s<\/td>\n<\/tr>\n
Throughput Capacity<\/td>\nUp to 400\u2013500 bales per hour (bale spacing dependent)<\/td>\n<\/tr>\n
Machine Weight<\/td>\nApproximately 65\u201380 kg<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Who Uses the 9JYY-4.5? Five Typical Operations<\/h2>\n
\n
\n
1<\/div>\n
\n

Small square bale hay producers<\/p>\n

Operations baling and stacking 5,000\u201350,000 small square bales per season. The 9JYY-4.5 replaces or reduces the manual relay chain \u2014 the line of people passing bales hand-to-hand from the paddock pickup point into the shed. One person feeds bales onto the conveyor at ground level; one person at the top stacks. The middle of the relay chain is eliminated.<\/p>\n<\/div>\n<\/div>\n

\n
2<\/div>\n
\n

Hay retailers and feed merchants<\/p>\n

Businesses receiving hay deliveries and stacking into retail sheds. Manual unloading of truck deliveries \u2014 typically 300\u2013500 bales per truck \u2014 is the highest-injury-risk activity in the operation. A conveyor positioned at the truck tail allows the driver or one person on the truck to slide bales onto the conveyor while one person in the shed stacks, reducing both the labour requirement and the manual handling risk.<\/p>\n<\/div>\n<\/div>\n

\n
3<\/div>\n
\n

Equine and lifestyle properties<\/p>\n

Horse properties and small hobby farms receiving annual hay deliveries of 200\u20131,000 bales. These operations often have no dedicated farm labour \u2014 the owner handles deliveries personally. A conveyor allows one person to unstack a truck and stack a shed without assistance, removing the need to organise helpers for delivery days.<\/p>\n<\/div>\n<\/div>\n

\n
4<\/div>\n
\n

Livestock farms with regular small bale supplementary feeding<\/p>\n

Operations feeding 20\u201360 small square bales per day as supplementary hay to sheep, goats, or cattle. A conveyor positioned from the hay shed to a feed preparation area reduces the daily carry distance and lifting required, making it practical for one person to prepare and distribute the full day’s hay allocation without physical strain.<\/p>\n<\/div>\n<\/div>\n

\n
5<\/div>\n
\n

Hay baling contractors<\/p>\n

Contract baling operations that provide a complete bale-and-stack service. Carrying a 9JYY-4.5 on the service vehicle allows the contractor to complete the stacking phase without relying on the farm to provide manual labour \u2014 a service differentiator that justifies a higher per-bale contract rate and reduces scheduling dependencies.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

\"9JYY-4.5<\/p>\n

Positioned at the shed entrance or truck tailgate, the 9JYY-4.5 eliminates the middle steps of the manual relay chain \u2014 reducing crew requirements from 3\u20135 people to 2 while increasing throughput per person.<\/p>\n<\/div>\n

Setup: Getting the 9JYY-4.5 Running in Under 15 Minutes<\/h2>\n
\n
\n
1<\/div>\n
\n

Position the lower end<\/p>\n

Place the conveyor’s lower (infeed) end at the point where bales will be fed onto it \u2014 shed doorway, truck tailgate, or the spot in the paddock where the bale accumulator deposits bales. The lower end should sit at a comfortable working height for the feeder (approximately 400\u2013600 mm above ground).<\/p>\n<\/div>\n<\/div>\n

\n
2<\/div>\n
\n

Set the elevation angle<\/p>\n

Adjust the conveyor’s angle using the elevation support legs to deliver bales to the stack height required. For a 2.4-metre stack, set the upper end to 2.6\u20132.7 metres (allowing the stacker to position bales without raising them above head height). Lock the elevation adjustment before starting the motor.<\/p>\n<\/div>\n<\/div>\n

\n
3<\/div>\n
\n

Connect power<\/p>\n

Plug the 240 V single-phase motor into a standard shed outlet or extension lead rated for the motor current (typically 6\u20138 amps). Confirm the extension lead is rated for outdoor use and the run length does not cause excessive voltage drop \u2014 a 25-metre lead of 1.5 mm\u00b2 cable is adequate for the 9JYY-4.5 motor current.<\/p>\n<\/div>\n<\/div>\n

\n
4<\/div>\n
\n

Test run before loading<\/p>\n

Run the belt empty for 30 seconds and confirm it tracks centrally without drifting to either side. A belt that drifts to one side indicates the tracking adjustment needs correction before bales are loaded \u2014 a bale that falls off a misaligned belt at 2.5 metres height is a safety hazard.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

EverPower 9JYY-4.5: Available in Australia<\/h2>\n

The 9JYY-4.5 is available from EverPower Baling Machinery Australia at the Condell Park NSW warehouse. Contact EverPower at +61 2 9708 3322 or sales@silage-baler.com for current pricing and delivery timeframes. The 9JYY-4.5 weighs approximately 65\u201380 kg and can be transported in a standard ute tray or trailer \u2014 no special lifting equipment is required for site deployment.<\/p>\n

Request 9JYY-4.5 Pricing and Specifications<\/a><\/div>\n

Recommended Product: 9JYY-4.5 Hay Baler Conveyor<\/h2>\n
\n
\"9JYY-4.5<\/div>\n

4.5-metre motorised belt conveyor for small square hay bales up to 35 kg. 0.75\u20131.1 kW single-phase 240 V motor \u2014 runs from any standard shed outlet. Adjustable elevation from 20\u201340 degrees, reaching stack heights of 2.2\u20132.8 m. Up to 400\u2013500 bales per hour throughput. Approx. 65\u201380 kg \u2014 transportable in a ute tray. Available from EverPower’s Condell Park NSW warehouse, Australia-wide delivery.<\/p>\n

Get Pricing & Availability \u2192<\/a><\/div>\n<\/div>\n

Frequently Asked Questions<\/h2>\n
\n
\n1. What bale types does the 9JYY-4.5 handle?+<\/span><\/summary>\n
The 9JYY-4.5 is designed for small square bales up to 35 kg<\/strong> \u2014 the standard 200 \u00d7 360 \u00d7 450 mm format produced by most small-square balers in Australia. It is not designed for large round bales or large square bales, which require different handling equipment.<\/div>\n<\/details>\n
\n2. Does the 9JYY-4.5 need 3-phase power?+<\/span><\/summary>\n
No. The 9JYY-4.5 runs on single-phase 240 V<\/strong> \u2014 a standard Australian household and shed power outlet. No 3-phase infrastructure is required, making it practical for any shed or farm property regardless of grid connection.<\/div>\n<\/details>\n
\n3. How high can the 9JYY-4.5 reach?+<\/span><\/summary>\n
At a 30\u201335 degree angle, the 4.5-metre belt delivers bales at approximately 2.2\u20132.8 metres<\/strong> above the infeed level. This covers the full height of a standard 3-high small-square-bale stack in most Australian hay sheds.<\/div>\n<\/details>\n
\n4. How many people does a conveyor need to operate?+<\/span><\/summary>\n
The 9JYY-4.5 is designed for a 2-person operation<\/strong>: one person feeds bales onto the conveyor at the bottom, one person at the top stacks. Compared to a 4\u20135 person manual relay chain, the conveyor reduces the crew requirement by 50\u201360% for the same throughput.<\/div>\n<\/details>\n
\n5. Where can I buy the 9JYY-4.5 in Australia?+<\/span><\/summary>\n
Contact EverPower Baling Machinery Australia<\/strong> at +61 2 9708 3322<\/strong> or sales@silage-baler.com<\/strong>. Stocked at the Condell Park NSW warehouse with Australia-wide delivery. Current pricing and delivery timeframes provided on request.<\/div>\n<\/details>\n<\/div>\n
\n

Cut Hay Stacking Labour in Half. Start With the 9JYY-4.5.<\/p>\n

EverPower can advise on setup, power requirements, and delivery for the 9JYY-4.5 on your property.<\/p>\n

Contact EverPower Australia<\/a><\/p>\n

EverPower Baling Machinery Australia Pty Ltd \u00a0|\u00a0 27 Harley Crescent, Condell Park NSW 2200
\n\ud83d\udcde +61 2 9708 3322 \u00a0|\u00a0 \u2709\ufe0f sales@silage-baler.com<\/p>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

The Labour Bottleneck Every Hay Operation Faces After the Baler For most Australian hay operations, the baler is the headline machine \u2014 it is the piece of equipment that determines how many bales per hour the paddock produces. But the baler is only half the productivity equation. Once a small square bale is ejected onto […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-722","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"_links":{"self":[{"href":"https:\/\/silage-baler.com\/nl\/wp-json\/wp\/v2\/posts\/722","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/silage-baler.com\/nl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/silage-baler.com\/nl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/silage-baler.com\/nl\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/silage-baler.com\/nl\/wp-json\/wp\/v2\/comments?post=722"}],"version-history":[{"count":1,"href":"https:\/\/silage-baler.com\/nl\/wp-json\/wp\/v2\/posts\/722\/revisions"}],"predecessor-version":[{"id":725,"href":"https:\/\/silage-baler.com\/nl\/wp-json\/wp\/v2\/posts\/722\/revisions\/725"}],"wp:attachment":[{"href":"https:\/\/silage-baler.com\/nl\/wp-json\/wp\/v2\/media?parent=722"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/silage-baler.com\/nl\/wp-json\/wp\/v2\/categories?post=722"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/silage-baler.com\/nl\/wp-json\/wp\/v2\/tags?post=722"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}